|
Print Your
own
Book
updated
15-Aug-2009
|
|
Deutsch
What is New ?
New with BookPrintXP version
2.2.03 compared with version 2.2.02 (since August 2009)
The registration rate has been reduced by 5
EUR
The following error has been fixed:
- When the Export-Button in the Printer
Dialog Window was pressed, the program crashed.
New with BookPrintXP version
2.2.02 compared with version 2.2.01 (since September 2008)
The following errors have been fixed:
- If a page range is selected for image
conversion and this range starts with an other page than the first page then
the program may fail.
- If EMF files are selected for the creation
of a GIF file the processing could be very slow due to insuficient recources.
New with BookPrintXP version
2.2.01 compared with version 2.2 (since August 2008)
You can now create
animated GIF files
New with BookPrintXP version
2.2 compared with version 2.1.04 (since April 2008)
The following functions have been added:
- Marked pages are being edited at once
- Drag BookPrint pages per Drag&Drop to
other application programs. Move marked pages within the BookPrint Preview
per Drag&Drop
- The Edit Page with external Program
command has been added to the Page Edit: Context Menu and the Page
Edit Dialog
- Double clicking with the left Mouse Button
on a page of the BookPrint Preview enlarges this page
The following errors have been fixed
- The four right pages have not been printed
when setting 2x8 pages/sheet with booklet or tile folder format
- The rear pages have not been printed in the
correct sequence when Manual Duplex, Print Sequence 135/246, and
Pages/Booklet > 1were applied
- Minor corrections
New with BookPrintXP version
2.1.03 compared with version 2.1.02 (since July 2007)
The following errors have been fixed
- Sometimes it happened that only the 1st page
of a document was printed
- The Cutting Edge was printed on both
sides. Now this line is only printed on one side
- For Troubleshooting the
information about the used Windows version is written to the BookPrint
Configuration file
-
New with BookPrintXP version
2.1.02 compared with version 2.1.01 (since March 2007)
The following errors have been fixed
- When printing with the Manual Duplex
option the program did not stop in order to display the message ...
reinsert the printed paper stack ...
- After conversion of a Job List
into a Page List the Adjust Document Margins function did
not work
New with BookPrintXP version
2.1.01 compared with version 2.1 (since March 2007)
This version was only
published with the German BookPrint2
The following error has been fixed
- BookPrintXP did not run for users without
access privileges
New with BookPrintXP version
2.0 compared with version 1.5.1
The following functions have been added or changed:
- BookPrint has been adopted to Windows Vista.
The program was tested with Windows Vista (TM) RC1 Evaluation copy.
Build 5600
- For Windows Vista a BookPrServ service program is added
- The 16 Bit Help Sytem (BookPrnt.HLP) has been replaced
by the 32 Bit HTML Help System (BookPrnt.CHM).
- With the old versions spool files could have
been modified by delete and undelete functions. With this new version the
spool files are untouched
- The Page List function has been added: Spool
files (Print Job files) and some picture files (GIF and TIFF) may contain more
than one page. If the number of pages is higher than the files in the Job
List the list may be converted to a Page List.
- The Job List Dialog has been extended by Move
Up and Move Down functions.
The following error has been fixed with release 2.0
- Sometimes the BookPrint Manager could hang at startup
New with BookPrintXP version
1.5.1 compared with version 1.5 since April 21, 2006
-
The AddPrinter
Installation program displayed German commands (e.g. “Weiter” instead off
“Continue”)
-
Although the
registration was completed successfully the advertisement pages were created
-
The setting of
the print sequence 6,4,2/1,3,5 in the Printer Dialog was not saved
-
The setting of
the print sequence 2,4,6/1,3,5 in the Printer Dialog didn’t work correctly
-
With Windows 9x
the display of the advertisement pages could cause errors
-
The red dotted
line for the bottom margin was not displayed correctly
New with BookPrintXP version
1.5.1 compared with version 1.4 since Jan. 27th 2006
The following functions have been added:
- Drag and Drop:You
may drag a collection of picture files from the windows explorer with the
mouse and drop them on a selected page of the preview window. These pictures
are then inserted before or after the selected page.
- The
Context menu
for Page Edit has been extended by the Copy to Clipboard and
Recover Print Job
commands. You may copy pages of print jobs or EMF-files to the clipboard
either in EMF- or TEXT-format.
With the Recover Job Pages command all deleted pages of
the print job are recovered.
- The list of applications has been
extended by
2x8, 2x16, and 2x32 Pages
per sheet. The pages are
printed such that the sheets have not to be folded.
- Flipped or
Mirrored pages
may be printed. The flip/mirror option has been added to the
Print... Dialog
New with BookPrintXP version
1.4 compared with version 1.3 since August 19th 2005
The following functions have been added:
-
Adjust Document Margins:
In many cases the margins of a page are actually larger than the margins
defined by the Margins
setting (BookPrint Margins).
Thus the pages are displayed smaller than expected. The margins are larger
than the BookPrint Margins, because the margins of an application (Document
Margins) are added to the BookPrint Margins. For example you may have
specified margins with the WinWord application before printing to the
BookPrint printer. These Document Margins are being displayed within the frame
of the BookPrint Margins. With the new function
Adjust Document Margins
the pages are adapted to the BookPrint Margins. The program then computes the
surrounding white stripes of all pages and removes them.
-
The Page Edit Dialog has been extended by the
Adjust Document Margins and Undo Adjust
Doc.Margins commands
-
Context menu
for Page Edit has been extended by the Adjust
Document Margins and Undo Adjust Doc.Margins
commands
- Printer Name list of the Print...
Dialog may also show network printers.
-
The Home and
End Keyboard Shortcuts have been added.
The following error has been fixed with release 1.4.0.1
-
The
Print… button was deactivated if there was no job to be printed. As a
consequence you were not able to change any field in the Print… Dialog.
Especially you were not able e.g. to uncheck the Print immediatelyHELP_PRINTX
option.
-
With
eight pages/sheet the arrangement of pages could be incorrect.
New with BookPrintXP version
1.3 compared with version 1.2 since March 11th
2005
The following functions have been added or
improved:
- Installation:
The BookPrint Printer Wizard for Windows 2000/XP has been made easier. The
print spooler service is not anymore started at the console (showing red
message).
- Deleting print jobs
is improved with the Win 2000/XP version – no console messages.
- Improved Uninstalling Procedure
with the Win 2000/XP version – no console messages.
- The printer name list (drop down list)
of the Print… dialog may also show network printers.
- Tooltips
for the main push buttons have been added.
- With Win 2000/XP the program may also be
accessed by user accounts with restricted rights
-
- Printers with a name longer
than 32 characters could not be opened.
New with BookPrintXP version
1.2 compared with version 1.1 since Nov. 12th
2004
The following functions have been
added:
-
- With desktop resolution
800x600 the Extras window was not shown correctly.
- The run type library
gdiplus.dll has been replaced by an updated version. This file is required
by Windows 9x and 2000.
New with BookPrintXP version
1.1 compared with version 1.0.01 since 02-July-2004
The following function has been
added:
-
You
may edit pages directly if you right click the mouse on a previewed page. Then
from the
Page Edit Context Menu
you
may save, delete or rotate the selected page.
-
The
program now supports GIF-Files and TIFF-File with multiple
frames.
New with BookPrintXP version
1.0.01 since 27 April 2004
Correction:
-
With print jobs created with WordPad the first page was not printed
-
The installation help
topics of the Help File have been corrected (translation of dialogs).
New with BookPrintXP version
1.0 compared with BookPrintMe
The functions of BookPrintXP are based on the German
shareware program BookPrint2 Version 1.1.01. Only the text has been
translated from German to English. Some text of BookPrintMe has been
used.
The following functions have been added:
-
BookPrintXP supports Windows 9x/Me and Windows 2000/XP as well.
-
Installing the BookPrint Driver depends on the
operating system
- Print
immediately without interruption by the
BookPrintXP Manager
- The
margin dialog is expanded by document margins
- Ink
saving mode
- With
Page Edit you can rotate pages and/or save the page as an image file (BMP,
PNG, JPG).
- New
Export/Import functions
- With the
import function you can import image files
- With the
1x2 Pages/Sheet setting no advertisement pages are printed even if you use the
non registered version of BookPrintXP
- New
codes for the Heading/Footing
- The
Watermark option allows the editing and using of image files
- More
zooming features
-
Marking Lines
- Support
of right to left languages
New with BookPrintMe version
1.01 compared with version 1.0
Correction:
-
The
BookPrint-Driver
was not installed automatically with the Setup procedure.
After installation of version 1.0 the driver had to be installed manually as
described under the Help topic:
Installation of BookPrint-Driver
-
Program Icon was not
installed
First BookPrintMe Version 1.0
BookPrintMe is based on the German shareware
program BookPrint Version 1.7.03. The functions of both versions are the same.
Only the text has been translated from German to English.
updated
15-Aug-2009
Copyright (C) 1997-2008 Walter Eckel